Features & Applications
Specifications
Products Summary Table
Ordering Codes
Wavelength Division Multiplexer (WDM) is used to combine light with different wavelengths into a fiber or separate an optical signal into two fibers. It is based on thin film filter technology and metally packaged, which can be used in high-power applications in WDM systems.

 

-WDM Thin Film Filter (TFF)-

 

 

Features
Low insertion loss
High return loss
High directivity
Environmentally stable
Optical path epoxy free
Applications
CATV systems
DWDM systems
Erbium-doped fiber amplifier (EDFAs)

 

Specifications (TFF WDM)
Parameter 1310/1550nm 1480/1550nm 1510/1550nm
980/1550nm
1550/1625nm
Units
Passband Wavelength

1270~1350/ 1530~1600

1450~1490/ 1530~1580

1500~1520/ 1530~1570

950~1010/ 1500~1600

1528~1563/ 1615~1635

nm
Insertion Loss Max 0.7 1.0
dB
Isolation Min 30 35
dB
Reflection Band Wavelength

1530~1600/ 1270~1350

1530~1580/ 1450~1490

1530~1570/ 1500~1520

1500~1600/ 950~1010

1615~1635/ 1528~1563
nm
Insertion Loss Max 0.5 0.6
dB
Isolation Min 12 15
dB
Thermal Stability Min 0.005 0.007
dB/ºC
Return Loss Min 50 45
dB
PDL Max 0.10
dB
Handling Power Max 300
mW
Operating Temperature -5 to +70 -10 to +65
ºC
Storage Temperature -40 to +85
ºC
* The specification is for the TFF WDM without connector.

 

Summary Table for all Wavelengths (TFF WDM)

Wavelength Ports Remarks Datasheet
966~986 / 1020~1040 nm 1x2 Max. Handling Power: 1W
966~986 / 1054~1074 nm 1x2  
970~990 / 1020~1040 nm 1x2  
1270~1350 / 1460~1480 nm 1x2  
1270~1350 / 1620~1650 nm
1290~1330 / 1470~1630 nm 1x2  
1440~1480 / 1520~1660 1x2, 2x2  
1455~1500 / 1400~1440 nm 1x2  
1460~1480 / 1620~1650 nm 1x2  
1520~1554 / 1563~1600 nm 1x2  
1520~1564 / 1545~1600 nm
1520~1564 / 1570~1600 nm
1527~1533 / 1536~1565 nm 1x2  
1528~1543 / 1547~1563 nm 1x2  
1528~1563 / 1570~1610 nm 1x2  
1528~1563 / 1615~1635 nm 1x2, 2x2  
1530~1543.7 / 1548~1561 nm 1x2  
1530~1560 / 1570~1600 nm 1x2, 2x2  
1530~1570 / 1059~1069 nm 1x2  
1530~1570 / 1460~1480 nm 1x2  
1530~1580 / 960~1000 nm 1x2  
1530~1580 / 970~990 nm 1x2 Max. Handling Power: 300mW
1530~1580 / 980~1010 nm 1x2 With Isolator (Single/Dual Stage)
1530~1580 / 1450~1490 nm 2x2 With Tap Port and Isolator
1530~1580 / 1450~1490 nm 1x2 Max. Handling Power: 2W
1530~1580 / 1450~1520 nm 1x2  
1530~1610 / 1410~1490 nm 1x2  
1537~1543 / 1525~1535 & 1545~1565 nm 1x2  
1543~1547 / 1500~1535 & 1555~1580 nm 1x2  
1547~1553 / 1525~1545 & 1555~1565 nm 1x2  
1549~1565 / 1520~1545 nm 1x2  
1550~1554 / 1440~1480 & 1620~1660 1x2, 2x2  
1563.5~1576.5 / 1550~1560 nm 1x2  
1565~1575 / 1535~1552 nm 1x2  
1571~1605 / 1530~1561 nm 1x2  
1615~1635 / 1280~1340 & 1520~1580 nm 1x2  
1620~1660 / 1440~1554 1x2, 2x2  
1650~1660 / 1540~1560 nm 1x2  

Multimode Filter WDM

Wavelength Remarks Datasheet
830~870 / 1290~1330 nm  
1290~1330 / 830~870 nm
For customized specification on the TFF WDM, please contact us at contact@optolinkcorp.com.

 

Ordering Codes

OLWDM - T - [Configuration] - [Wavelength (Passband/Reflection Band)] - [Fiber Type] - [Connector Type]

Configuration Code

Wavelength (Passband/Reflection Band)

Code

Fiber Type

Code

Connector Type
Code
1 x 2 12 1310nm / 1550nm 135 250μm bare fiber 25
No Connector
NC
2 x 2 22
1550nm / 1310nm
135R 900μm loose tube 90
FC/APC
FA
  1480nm / 1550nm 145  
FC/PC
FP
1550 nm / 1480nm 145R
FC/UPC
FU
1510nm / 1550nm
155
SC/APC
SA
1550nm / 1510nm
155R
SC/PC
SP
980nm / 1550nm
985
ST/UPC
ST
1550nm / 980nm
985R
SC/UPC
SU
1550nm / 1625nm
156
LC/PC
LP
1625nm / 1550nm
156R
LC/UPC
LU
 
MU/PC
MP
* Opto-Link Corporation Ltd reserves the right to make changes to the TFF WDM without notice.

 

Back to WDM

 

 

 

© Opto-Link Corporation Limited 2002-2012. All Rights Reserved.